13
Contact CRC Industries at 800-556-5074 | smartwasher.com
Troubleshooting Continued
Machine Cleaning Performance Guide
Suggested SolutionPossible CauseIssue
1) Replace OzzyMat® with a new mat, soak mat for 10 minutes and
allow microbes to clean solution over night.
2) Usage of CRC OzzyBooster® recommended.
3) Review options with Technical Service.
Lack of filter maintenance
OzzyJuice® does not clean
1) Dry part and apply lubricant or corrosion inhibitor, such as CRC
3-36®, Power Lube®, SP-400™, Rust-Block™, or paint.
Part has been cleaned to bare metal and is
exposed to atmospheric conditions
Parts are flash rusting after
cleaning
1) Peel a filter layer or change Filter Mat if due for monthly service.
2) Safely unblock filter basket.
Filter Mat has become clogged
Filter basket has become blocked
Sink is slow to drain
1) Replace OzzyMat® with a new mat, soak mat for 10 minutes and
allow microbes to clean solution over night.
2) Usage of CRC OzzyBooster® recommended.
3) Review options with CRC Technical Service.
Lack of filter maintenance
Fluid has odor
Troubleshooting Flow Chart