Page 8Vortex8 User Manual
Version 1.0
3.1 Water
The IP65 rating of the Vortex8 fixture means it can survive low pressure water jets in all directions, but
not full submersion. It also means that it has a high resistance to dust and dirt. Precautions are advised.
3.2 Temperature
The Vortex8 is a high powered lighting fixture and will get quite hot during operation, especially on the
aluminium chassis due to heat dissipation. Care must be taken when handling the Vortex8.
• The maximum surface temperature of the lamp head will be 60° C/140°F, when operated in an ambient
temperature of 25° C/77° F
• Maximum ambient temperature for normal operation is 40°C/104°F.
3. Water and Temperature
The supplied PowerCon cable must be used when the Vortex8 is exposed to water.
Not all PowerCon cables are water resistant and can be an electrical hazard.
To Next Page
Loading...
