Need help?Do you have a question about the CreatBot DE Plus and is the answer not in the manual?
General| Build Volume | 300 x 250 x 300 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Print Speed | 30 - 100 mm/s |
| Extruder Type | Single |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
| Heated Bed | Yes |
| Display | 4.3" Touch Screen |
| Number of Nozzles | 1 |
| Supported Materials | PLA, ABS, PETG, TPU, Wood, Carbon Fiber |
| Power Supply | 24V |
Critical safety advice, danger warnings, and environmental guidelines.
Identification of external components on the printer's front panel.
Detailed view and identification of print head components.
Overview of significant features like auto-leveling and hot chamber.
Step-by-step guide for bed leveling and calibration.
Instructions for loading, unloading, and changing filament.
Navigating main menu, status, and detail pages.
Operating printer axes and adjusting motion calibration.
Guide for installing and configuring the CreatWare slicing software.
Overview of Quick Print UI, mouse/keyboard controls, and first print.
Detailed settings, model manipulation, view modes, and export options.
Adhesion types, plugins, G-code, and dual extruder alignment.
Solutions for common hardware malfunctions and errors.
Addressing adhesion, warping, stringing, and other print defects.
Technical specifications for various CreatBot 3D printer models.
To Next Page
