Need help?Do you have a question about the CreatBot F1000 and is the answer not in the manual?
General| Build Volume | 1000 x 1000 x 1000 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max. Bed Temperature | 100 °C |
| Display | Touchscreen |
| Power Requirements | 350 W |
| Heated Bed | Yes |
| Extruder Type | Single |
| Supported Materials | PLA, ABS, PETG, TPU |
| Connectivity | USB |
| Power Supply | AC 220V |
| Printing Technology | Fused Deposition Modeling (FDM) |
| Software | CreatWare |
Critical safety warnings regarding high temperatures and electrical hazards for safe operation.
Guidelines for optimal operating conditions and material storage to ensure printer performance.
Identification of external parts and controls on the printer's front panel.
Detailed breakdown and labeling of the new printer head components.
Highlights of unique features like auto-leveling and hot chamber system.
Step-by-step instructions for manual and automatic bed leveling.
Procedures for loading, unloading, and managing filament.
Overview of the main menu and touch controls.
Explanation of status, detail, and printing pages.
How to use storage media for printing files.
Manual control of printer axes and motion calibration.
Displays printer details and firmware version.
Guide for installing and configuring the CreatWare slicing software.
Using quick print, first model, and interface navigation.
Features for mirroring, rotating, scaling, and viewing models.
Core, advanced, export settings, and filament specifics.
Dual head printing, alignment, GCode, and plugins.
Solutions for common hardware problems and error messages.
Guidance on resolving common printing failures and defects.
Comparison of key specifications across different CreatBot printer models.
Contact information, website, and address for the manufacturer.
To Next Page
