Need help?Do you have a question about the CreatBot PEEK-300 and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Nozzle Temperature | 500°C |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, Ethernet |
| Display | 4.3-inch Touchscreen |
| Bed Temperature | 200°C |
| Chamber Temperature | Up to 90°C |
| Machine Weight | 85 kg |
| Supported Materials | PEEK, PEKK, PC, ABS, Nylon |
| Nozzle Diameter | 0.4 mm (default), options available |
| Printing Technology | FDM |
| Power Requirements | 220V |
Important information about installation, use, and maintenance.
Warnings about high temperatures and electric shock hazards.
Recommended operating temperature and storage conditions.
Identifies front panel components of the 3D printer.
Details the components of the printer's new print head.
Highlights new features like auto-leveling and hot chamber.
Guide on how to level the printer's platform.
Step-by-step instructions for initial bed leveling, manual and auto.
Instructions for loading filament into the printer.
Guide on how to unload or change filament.
Overview of the printer's touchscreen interface and main menu.
Explains the status page for monitoring temperatures and settings.
Describes the detail page, showing printing progress.
Details the filament menu options for managing filament.
Explains the printing page interface.
How to use SD cards or USB drives for printing.
Controls for moving the printer's axes (X, Y, Z).
Accessing and using the setting menu for calibration.
Displays printer information like firmware and usage time.
Guide on installing the CreatWare software.
Overview of Quick Print UI and printing your first model.
Explains mouse controls and keyboard shortcuts for the software.
Detailed explanation of the full software interface settings.
How to mirror and change view modes for models.
How to rotate and scale models in the software.
Right-click actions and understanding toolpath structure.
Explanation of basic settings for slicing models.
Detailed explanation of advanced slicing parameters.
How to export print settings and configurations.
Settings for adhesion types and software plugins.
Editing GCode and steps for dual extruder printing.
Vertical alignment and adding multiple printer types.
Procedure for horizontally aligning dual print heads.
Recommended print settings for various filament types.
Solutions for common hardware issues and errors.
Solutions for common printing problems.
More solutions for common printing problems like adhesion and blockage.
Technical specifications for the CreatBot F160 and F430 models.
Technical specifications for the CreatBot D600 and DX models.
Technical specifications for the CreatBot DX Plus and DE models.
Technical specifications for the CreatBot DE Plus and PEEK-300 models.
Technical specifications for the CreatBot F1000 model.
To Next Page
