Need help?Do you have a question about the CreatBot D600 Pro 2 and is the answer not in the manual?
General| Build Volume | 600 x 600 x 600 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Max. Heated Bed Temperature | 120°C |
| Nozzle Diameter | 0.4 mm |
| Compatible Filaments | PLA, ABS, PETG, TPU |
| Connectivity | USB, Ethernet |
| Display | Touchscreen |
| Number of Nozzles | 1 |
| Frame Material | Aluminum |
| Power Requirements | 220V |
Critical warnings for nozzle, platform temperatures, and electrical safety.
Recommended operating temperature and storage conditions for the printer and filament.
Identifies key components on the 3D printer's front panel.
Details the first set of components of the new printer head assembly.
Details the second set of components of the new printer head assembly.
Step-by-step guide for manual bed leveling and initiating auto leveling.
Instructions for preheating the hotend and loading filament into the extruder.
Procedure for unloading filament, including manual and automatic methods.
Explains the main menu interface for controlling printer functions and temperatures.
Details the functions assigned to various icons on the touchscreen interface.
How to adjust print speed, flow rate, and cooling fan speed during operation.
Guide to moving the printer's axes and performing homing operations.
Interface for managing filament loading, unloading, extruding, and retracting.
Instructions for selecting and printing files from an SD card or USB drive.
Shows details about time used, firmware, and UI version.
Adjusting motor step settings for X, Y, Z, and extruder axes.
Configuring fan speeds, and head/hotbed temperatures.
Steps to connect the printer to a 2.4GHz Wi-Fi network.
Visual guide on accessing and replacing a blown fuse in the printer.
Comparison of recommended settings for printing PLA and ABS materials.
Addresses problems like MINTEMP, MAXTEMP, USB issues, and printer movement.
Guidance on setting optimal nozzle and hot bed temperatures for filaments.
Tips for improving model adhesion, preventing warping, and resolving surface defects.
Solutions for filament not flowing, nozzle blockages, and dual color alignment.
To Next Page
