CreatBot D600 Pro 2 - Printer Operation: Settings Menu; Motion Calibration

X/Y/Z and exturder motor
setting (range:5-9999)
Save Back
The values in the picture are not real values, the real values refer to the printer
default values
Printer Operation
Setting menu
0000:00:00
6.1.XXXXXX
6.1.0
Printer Operation
Info. page
Print time used
Firmware version
Back
UI version
Time used
0000:00:00
Firmware
6.0.1
6.1.XXXXXX
UI version
- 16 -
- 17 -