CreatBot DS - Page 25

To Next Page

To Previous Page

Interface

1.Load3Dmodel,supportingthefilesofSTL/OBJ/DAE/AMF.

Note:TheProgramcanalsorecognizeplanarimages,andtransferthemto3Dmodelfiles.Supportimagefile

formatsincludeJPG/BMP/PNG.

2.SaveasGcodefile

3.Ifchangeanyslicingsetting,pleaseclickthis"Slice"buttontoshowtherealprintingtimeandfilament

requirement.

4.Printingtime,thelengthandweightoffilamentconsume.

5.Simulatetheprintingprocessunderdifferentmodes.

5.1Normal:Defaultstate

5.2Overhang:Measuretheangleofoverhang,andjudgeifitisnecessarytogeneratethesupportstructure

5.3X‐Ray:X‐rayvision

5.4Layers:Layerbylayertosimulatetheprintingprocess



Related product manuals