CreatBot DS - Page 36

SticktheKaptontape
Stickthekaptontape.tothebuildplate.Useacreditedcardtopush
thetapedownwithoutairbubbles.
Itisthehightemperatureresistancedoublesidetape,itcontains
threelayers.
1Cleantheplatecarefullytoensurethecleanandtidy,itwillhelp
youavoidbubblesafterapplyingthetapeonit.
Takethetapeout.Ifcoveringtheplatecompletely,itwillneed3
linesofthetape.
2Uncoveronesideofthetape,andthentrytostickitontheplate.
Pleaseensurethetapeissmoothenoughwithoutanybubbles.
3Youcanusetheyellowboardintoolboxtopushandpressit
whilesticking.
4Cutthetapeoffatthesamewidthoftheplate.