5
Proprietary, patented product and assembly instructions. Do not copy or distribute.
Insert (12) Posts into
corresponding post holes
in CB 2 &
(2) Base Support
Pins to corresponding
holes.
Install (1) Right Table Lift
using
(4) #1: 13 mm Euro Screws
Stand CB 2 on its edge with back
groove at the bottom and be sure
posts, dowels & pins are aligned with
built section.
CB 2 carefully
into built section.
8
9
RH
RH
CB Lid
CB Shelf 2
CB2
Posts (12)
#1 Screws (4)
Base Support
Pins (2)
CB2
Slide CB dividers (2) in one at a time
CB Lid
&
CB Shelf 2
using
(4) #3 1 1/2 Confirmat Screws
Use ONLY a MANUAL phillips
(2) angle brackets
(8) #5 14mm washer
CB Divider
CB1
Slide CB dividers (2) in one at a time
& secure to
CB Lid
&
(4) #3 1 1/2 Confirmat Screws
11
Slide CB dividers (2) in one at a time
& secure to
CB Lid
&
(4) #3 1 1/2 Confirmat Screws
11
Slide CB dividers (2) in one at a time
& secure to
CB Lid
&
CB Shelf 2
(4) #3 1 1/2 Confirmat Screws
in each divider.
11
Plug Hole
Cover (1)
To Next Page
Loading...
