Installing and Using Sound Blaster Extigy 2-1
Installing and Using Sound Blaster Extigy
Hardware
Connections
1. Turn on your computer.
2. Connect the supplied USB cable and AC adapter as shown in Figure 2-1.
Sound Blaster Extigy should
only be operated with the
supplied AC adapter.
• The USB cable can be
connected to your
computer while the
computer is turned on.
• The USB port(s) on some
computers are located on
the front panel instead of
the back.
Power outlet
Figure 2-1: Connecting Sound Blaster Extigy to the computer and power supply.
Desktop Computer
USB cable
USB port
USB port
12V DC In
Note: Do this last.
Notebook computer
To Next Page
Loading...