9
❒
Attach the Volume Control
holder only to a mounting
surface that is smooth and clean,
for example, the side of your
computer monitor.
❒
See “Controlling Noise and
Distortion” on page 12 for
related information.
Volume Control/Power Switch
5
Slide the volume control into the holder.
2
Press exposed adhesive side firmly
against back of holder.
1
Remove protective paper from one
side to reveal adhesive.
3
Peel off remaining paper strip from
mounting tape on holder.
4
Press the exposed adhesive side firmly
against the mounting surface.
To Next Page
Loading...
