Creative iRoar Go User Manual

3
4
Charging your speaker - Battery status indication
Power Saving
For better user connectivity experience, the iRoar Go automatically enter
auto standby mode after approximately 28 hours of inactivity when the
power adapter is attached via a main outlet to the speaker. This power
saving mode can disabled via the iOS or Android mobile app if desired.
Note: The speaker automatically powers down after 15 minutes when
battery operated if there is no Bluetooth or USB connection, and no
audio recording/playback. This feature helps to protect the internal
battery and cannot be disabled.
Whenever the speaker is connected to the power adapter, the battery status
indicator will continually blink to indicate charging, or be continually lit to
indicate full charge.
Battery full Green
Battery Half Full Orange
Battery low Red
Battery charging
Blinking
green
Battery Power Status indication

Creative iRoar Go Specifications

General

Tweeter	Yes
Tweeter diameter	38.1 mm
Number of drivers	5
Number of speakers	1
Audio output channels	- channels
Subwoofer driver diameter	63.5 mm
RMS rated power	- W
Bluetooth version	4.2
Bluetooth profiles	A2DP
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Black
Product design	Rectangle
Recommended usage	Universal
Battery type	Built-in
Battery capacity	5200 mAh
Power source type	Battery
Battery life (max)	12 h

Weight and Dimensions

Depth	97 mm
Width	192 mm
Height	54 mm
Weight	810 g