Creative Live! - Getting Started: Installation and Verification; Install Live! Cam Software

2 Getting Started
Getting Started
Step 1: Installing Your Live! Cam
You need to install device drivers and applications before using your
Live! Cam.
If you accidentally begin installation with your Live! Cam connected and the
Add New Hardware Wizard or Found New Hardware Wizard dialog box
appears, click the Cancel button.
1 Insert the Installation CD into your CD-ROM/DVD-ROM drive.
Your CD should start automatically. If it does not, follow the steps below:
i. Double-click the My Computer icon.
Alternatively, click Start My Computer.
ii. Right-click the CD-ROM/DVD-ROM drive icon, and then click
Autoplay.
2 Follow the instructions on screen to install drivers and applications.
DO NOT connect your Live! Cam to your computer before installing
the drivers.
Maple QSB_Multi_CLE.book Page 2 Tuesday, June 20, 2006 9:09 AM