User Manual for Handheld Pulse Oximeter
5
②
If Lithium battery (rechargeable) i s provided, place the
lithium battery into the battery house, and insert its
terminal header into the corresponding connector in the
battery compartment.
3
）
Close the battery cover and lock it.
4
）
Fixing Holder, as shown in figure 2-3.
Notes:
①
When the device i s provided with AA alkaline
batteries and it shows l ow battery, the user should replace the
batteries in time.
②
When the device is provided with lithium battery and it
shows low battery, the user should recharge the battery in time.
That is, connect one end of t he charging cable to t he device's
DC power input, and connect the other end to the USB power
(from PC or DC adapter). When the display screen appears the
rolling icon "
", it means the battery is charging; When the
screen shows icon "
", it means the battery is fully
charged. Pulling out the charging cable, then t he above icon will
disappear.
Safety instruction for operation:
0
Do not throw the battery into the water, liquid and fire.
0
Keep the battery out of the reach of the child.
0
Do not disassemble the battery.
Please remove the battery and put it to specified condition if
the device will not be used for a long time.
If the battery is damaged, please replace it with the same
model AA alkaline battery or lithium battery provided by the
same manufacturer.
To Next Page
Loading...