Creative PC 66B - 9 Troubleshooting

User Manual for Handheld Pulse Oximeter
25
9 Troubleshootin
g
Trouble Possible Reason Solution
Unstable
SpO
2
and
Pulse
Rate
display
1. The finger i s not
placed far enough
inside.
2. The finger i s
shaking or the
patient is moving.
1. Place the finger
correctly inside and try
again.
2. Reduce patient
movement.
Device
will not
switch on
1. The batteries are
drained or almost
drained.
2. The batteries are
not inserted
properly.
3. The device i s
malfunctioning.
1. Change batteries.
2. Reinstall batteries.
3. Please contact the
local service center.
No
Display
1. The device will
power off
automatically when
there is no signal
and no operation for
1 minute.
2. The batteries are
almost drained.
1. Normal.
2. Change batteries.