Creative Sound Blaster X-Fi card installation
HP xw Workstation series
This document describes the hardware and software installation of the Creative Sound Blaster X-Fi. For
more information, refer to the Installation and Application CD.
Kit contents
●
Sound Blaster X-Fi audio card
●
Installation and Application CD
●
Front audio adapter cable (for HP xw6000 or xw8000
series workstations, see the system requirements
section)
●
Regulatory compliance notices
●
Cable clip
●
Warranty information
●
Support arm
System requirements
●
HP xw Workstation series (except the HP xw3100 Workstation)
●
Microsoft Windows XP® Service Pack 1 (SP1) or newer operating system
●
Optical drive
●
Empty PCI or PCI-x slot (see Note on page 4)
Warranty information
Any warranty information is superseded by the HP warranty term provided in the warranty document.
© 2007 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered
trademark of Hewlett-Packard Development Company, L.P. Microsoft and Windows are
U.S. registered trademarks of Microsoft Corporation. Printed in the U.S.
ENWW HP xw Workstation series 1
To Next Page
Need help?
General
