Creda Aquawave White - User Manual

16
IMPORTANT WARNINGS!
DO NOT SWITCH THE APPLIANCE ON IF YOU SUSPECT IT OF BEING FROZEN.
WAIT UNTIL YOU ARE SURE IT HAS THAWED OUT.
DO NOT OPERATE THE APPLIANCE IF WATER DISCHARGES FROM THE PRESSURE RELIEF
VALVE. MAINTENANCE IS REQUIRED BEFORE THE APPLIANCE CAN BE SAFELY USED.
THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN)
WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES,
OR LACK OF EXPERIENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN
SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE
BY A PERSON RESPONSIBLE FOR THEIR SAFETY.
CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY
DO NOT PLAY WITH THE APPLIANCE.
1. Ensure the electricity and water are turned on to the unit.
2. Press the start / stop button “B”.
This will turn the shower on, the water will flow and the
neon indicator light will illuminate. It is recommended that
you do not wholly enter the water flow during this period.
3. Knob “A” controls the power selection.
Select “High / ”, “Medium / ” or “Cold / ”
The “small bar” indicates knob setting.
4. If the water is not at your desired showering
temperature, turn knob “C” a small amount until you
reach the desired showering temperature.
Turn clockwise for cooler.
Turn anti-clockwise for warmer.
5. When you have finished showering, press the start / stop button “B” again.
The water will stop flowing and the neon indicator will go out.
10.5kW Models Only-Water will continue to flow for approximately 7 seconds before switching off.
6. Switch off the electricity supply at the ceiling switch or local isolator.
Notes
• Wait 20 seconds for the temperature to stabilise after each adjustment.
• The neon indicator light illuminates when the heaters are on and, if the shower has
been recently used, it may take up to 20 seconds to come on
.
During this time the water may go from very hot to cold before stabilising.
• The position of knob “C” will be approximately the same each time the shower is
used, varying only with incoming water temperature or pressure changes
(e.g. you will only need to change from summer to winter).
• During normal operation, if an overheated water temperature is sensed then the
heater will switch off and the neon indicator light will go out.
Water will continue to flow and cool down before the heater switches back on again.
We offer a technical advisory service on the telephone to installers and
other customers with problems in the field. RING 0870 9000 430 (UK ONLY)
(A3) Leaflet No. 567-2151-04 Revision A
HOW TO USE YOUR AQUAWAVE CONTEMPORARY SHOWER (SUMMARY)
Relates to the Contemporary Shower Range ONLY, see unique section for Heritage Range
IMPORTANT:
This booklet should be left with the user
after installation and demonstration
AQUAWAVE RANGE
(Covers White, Colour and Heritage Models)
ELECTRIC SHOWER
Installation and User Guide

Summary

Aquawave Contemporary Shower Summary

Aquawave Heritage Shower Summary

Guarantee and Contact Details

Guarantee Terms and Conditions

Details the terms, conditions, and duration of the product warranty.

Guarantee Exclusions

Outlines conditions and usage not covered by the product guarantee.

Aquawave Shower Installation

Fixing the Shower to the Wall

Instructions for mounting the shower unit to the wall correctly.

How Your Aquawave Shower Works

Plumbing Requirements for Installation

Guidance on cold water supply connection and pressure requirements.

Seasonal Incoming Water Temperature Effects

How seasonal temperature changes affect shower settings and flow.

Incoming Water Supply Pressure Effects

How water pressure fluctuations impact shower performance and stability.

Troubleshooting and Service Information

Troubleshooting Common Issues (Part 2)

Checklist for qualified service personnel for common shower problems.

Professional Service Guidance

When to seek expert help for shower problems and who to contact.

Creda After Sales Support

Contact information for technical advisory services and support.

Electrical Installation and Self-Help

Electrical Installation Requirements

Details on earthing, wiring regulations, and cable sizing for installation.

Self-Help Troubleshooting (Part 1)

Initial checks for common shower malfunctions before calling service.

Detailed Heritage Shower Usage Instructions

Shower Accessory Assembly and Maintenance

Assembly of Shower Accessories

Instructions for fitting accessories like riser rail and handset.

Detailed Contemporary Shower Usage

Step-by-step guide for operating the contemporary shower model.

Aquawave Shower Maintenance Guide

Recommendations for cleaning and maintaining the shower unit and handset.

Creda Aquawave White Specifications

General

Brand	Creda
Model	Aquawave White
Category	Plumbing Product
Language	English