Creda CAR 033 - Page 12

Choosing and Setting a Mode
NOTE:
Once modied a programme must be
selected if you want to begin using it.
07:30
Comfort O
Next on at
08:00
Mode
Timer Mode
Manual
Eco Mode
Frost Protect
Standby
Timer Mode
Out All Day
Home AllDay
Holiday
User Timer
Main Menu
Timer Modes
To choose a timer mode press Menu and then to select Mode. Then press Enter.
Then select Timer Mode, again using the Enter button.
Select the mode required, by pressing the or followed by Enter.
For options Out All Day, Home All Day and User Timer, three choices are available -
Select, Preview and Modify.
• Select - choose this timer option.
• Preview - view the times currently set.
• Modify - change the times currently set.
When Modify is chosen, select and change each option using the , and Enter buttons. At
the end of each period, select Next to move to the following period. When a day is complete
select Save to update it.
Once the rst day has been set up it is possible to copy these settings to successive days or
all days by either choosing Copy Next or Copy All.
If preferred each day can be modied individually and saved. It is also possible to Clear each
day or Clear All days. Options are;
• Save - save times for one day.
• Copy Next - copy times to following day.
• Copy All - copy times to all seven days.
• Clear - zero all times that day.
• Clear All - zero times for all seven days.
To select a mode, choose Select and press Enter.
Date/Time
Mode
Options
12