Creda CAR 033 - Page 16

Runback Lock Mode
Introduction
This appliance has a built in runback lock mode, when this mode is activated all functionality
of the appliance is locked and the user will only have the ability to activate a runback timer
functionality. It is possible to limit the maximum operating temperature and runback duration
in the runback lock mode. This mode also features a setback function where a nonadjustable
setback temperature can be set
Operation in Runback mode
When runback mode is active the appliance settings are locked, it is only possible for the user
to activate predetermined runback periods. During these periods the appliance will energise to
control the room to a desired temperature. During a runback period the set point can be adjusted
by the user however, it is possible to assign a maximum set point limit during the runback mode
setup. Once the runback period has elapsed the appliance will switch into Comfort o mode or
into setback mode if enabled.
To activate a runback period the user must press the ADV button. There will be four runback
periods available to chose from which are accessible through sequential presses of the ADV
button. A subsequent press of the ADV button will return the appliance to Comfort o mode or
setback mode
12:00
Comfort O
12:00
Comfort O Comfort On
Runback
30 Minutes
Runback
60 Minutes
Comfort On
Runback
90 Minutes
Comfort On
Runback
120 Minutes
Comfort On
16