EasyManua.ls Logo

Creda REFLECTION - Grill Pan & Handle; Grill Pan Handle Assembly; Grill Pan Components; Grilling Door Position

Creda REFLECTION
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The grill pan handle is detachable from the pan, to facilitate cleaning and storage.
The grill pan handle can be fixed as follows:
Step 1 Remove screw & washers from the grill pan bracket (a).
Step 2 Tilt the handle over the recess (b).
Step 3 Slide it towards the centre of the pan (c).
Step 4 Locate the handle over the bracket (d).
For a fixed handle, replace screw & washers and ensure they are fully
tightened up. If a detachable handle is required, do not replace screw &
washers.
GRILL PAN FOOD GRID AND ANTI-SPLASH TRAY
DOOR POSITION FOR GRILLING
GRILL PAN & HANDLE
15
Note: If a fixed handle is required, the grill pan is unable to be stored in the oven with the
door closed and cannot be used as a meat pan.
Note: Do not grill with the grill/oven door
closed.
Step 1 Step 2 Step 3 Step 4
(a)
(b)
(c)
(d)
GRILL PAN
ANTI-SPLASH
TRAY
Note: To stop fat splashing onto the grill mesh, it is important to use the anti-splash tray as
shown in the grilling chart. Always clean the grill pan, anti-splash tray and food grid after each
use.
GRILL PAN
FOOD GRID

Related product manuals