Creda TSRE050 - Choosing and Setting Operating Modes; Timer Mode Selection Process; Saving and Copying Timer Settings

NOTE:
Once modied a programme must be
selected if you want to begin using it.
Timer Modes
To choose a timer mode press Menu and then Down to select Mode. Then press Enter.
Then select Timer Mode, again using the Enter button.
Select the mode required, by pressing the Up or Down followed by Enter.
For options Out All Day, and User Timer, three choices are available - Select, Preview and
Modify.
• Select - choose this timer option.
• Preview - view the times currently set.
• Modify - change the times currently set.
When Modify is chosen, select and change each option using the Up, Down and Enter buttons.
At the end of each period, select Next to move to the following period. When a day is complete
select Save to update it.
Once the rst day has been set up it is possible to copy these settings to successive days or
all days by either choosing Copy Next or Copy All.
If preferred each day can be modied individually and saved. It is also possible to Clear each
day or Clear All days to factory default times. Options are;
• Save - save times for one day.
• Copy Next - copy times to following day.
• Copy All - copy times to all seven days.
• Clear - factory defaults all times that day.
• Clear All - factory default times for all seven days.
To select a mode, choose Select and press Enter.
Choosing and setting a Mode
Main Menu
Date/Time
Mode
Options
Mode
Timer
Boost
Copy All
Selected
Out All Day
Comfort On
20