User Information
Press and hold Enter for ve seconds to enter the User Information menu;
Open Window detection (OW), when enabled, the heater will reduce the target room
temperature to limit the energy waste when an open window is detected. Disabled as default.
Factory Reset returns all settings to the factory presets.
Extra Charge - forces an extra charge of up to seven hours during o-peak periods.
If the output of the heater is not able to deliver the required comfort level, then it is possible
to force the heater to store additional energy. In this way, more electrical energy is stored
during the o-peak period and this will increase comfort levels. Up to seven hours additional
o-peak charging can be selected.
Note: The extra charge option will lead to more energy being stored during the o
peak period, this will lead to higher running costs. Only use this setting when a room
is consistently below the required temperature and you are sure that the timer mode is
set up and selected correctly.
User Information
User Info
Open Window
Factory
Extra Charge
24
To Next Page
Loading...
