NOTE:
In all modes, except holiday mode, Up and Down can be used to
adjust the required room temperature.
NOTE:
It is recommended that the timer is used as doing so can reduce the
running cost. Operating the appliance in the permanent heating modes
as Boost or Auto Boost may result in increased running costs.
The heater comes pre-programmed with a set of heating proles. There are three options
available - two pre-programmed and one user adjustable timer;
1. User Timer (pre-programmed, factory default) - provides greatest exibility to the user.
Four time slots are available throughout the day and these can be customised for each
day of the week. Factory default times: 06.30 until 09.30, 11.00 until 13.00, 15.00 until
17.00, 18.00 until 22.00.
2. Out All Day (pre-programmed) - has the following preset times Monday to Sunday,
which can be altered if desired 07.00 until 08.30 17.30 until 22.00, (factory default times).
3. Holiday - set the date of return and the temperature required. 7°C is advised if you just
want to protect the property from frost while you are away.
The heater can also maintain a constant room temperature using the following modes;
1. Boost mode heats the room to a selected temperature for 1, 2 or 3 hours..
2. Auto Boost Function maintains a room temperature during comfort periods, when the
core is depleted.
Mode of Operation
19
To Next Page
Loading...
