Crem EX Series - Milk Steaming and Frothing Guide; SmartSteam Milk Steaming and Frothing; SmartSteam Foam Setting Adjustment

21
Original instructions.
OPERATION
· Steaming and frothing milk
· SmartSteam: Steaming and frothing milk
1. Place the steam wand over the drip tray and open the steam knob/handle for a few seconds to allow
condensed water to be ejected. Close the steam knob/handle when only steam is coming out.
2. Immerse the steam wand into the milk, making sure the wand tip is submerged. Open the steam
knob/handle again to begin steaming or frothing the milk. Always keep the tip of the steam wand
submerged in the milk while steaming!
3. Once the milk reaches the desired temperature, close the knob/handle and wait for the steaming
to stop, then remove the pitcher.
4. After steaming/frothing is nished, position the steam wand over the drip tray and open the steam
knob/handle again for a few seconds to purge any milk remaining in the wand. Then wipe down the
outside of the steam wand with a damp cloth to prevent nozzle blockage and to keep it clean.
1. Pull the handle up (for at least 3 seconds) to ush the steamer and eject any residue that may
be in the steam tip. After a long period of inactivity it is recommended to do a long ush.
2. Start the SmartSteam by tipping the handle up for recipe 1 or tipping the handle down for recipe 2. Milk
temperature will be shown on the display.
3. SmartSteam will stop automatically when the programmed temperature is reached.
4. When the steaming is nished, remove the milk pitcher and wipe down the outside of the
SmartSteam with a damp cloth to keep it always clean. Afterwards, aim the SmartSteam wand
down towards the drip tray and repeat the ush (step 1).
Nozzle Jug Size Milk volume
SmartSteam
Temperature (SSt)
SmartSteam
PumpSpeed
(SSP)
SmartSteam
Temp. Oset
Air Stop (SSo)
Optimal
Milk Temperature
330-400 ml
11-14 oz
175 ml
6 oz
62 ºC
143.6 ºF
44% 14 ºC
6-10ºC
(43-50ºF)
500-600 ml
17-20 oz
275 ml
9 oz
62 ºC
143.6 ºF
44% 14 ºC
330-400 ml
11-14 oz
175 ml
6 oz
62 ºC
43.6 ºF
75% 0 ºC
500-600
17-20 oz
275 ml
9.3 oz
62 ºC
143.6 ºF
75% 0 ºC
Pro Tip: For a thinner/wetter milk foam reduce the pump speed and/or increase the SmartSteam
oset. For thicker/drier foam increase the pump speed and/or decrease the SmartSteam oset.
The SmartSteamer includes two separate nozzles:
BARISTA (1 hole)
For best quality milk
foam
Recommended Software Settings:
Auto
BARISTA NOZZLE (Default)
Pump Speed: 44%
Temp. Oset: 14 ºC
TURBO NOZZLE
Pump Speed: 75%
Temp. Oset: 0 ºC
· SmartSteam foam setting adjustment
TURBO (8 hole)
For faster milk foam
WARNING!
Do not remove the
pitcher or allow the
steam wand to extend
out of the milk while
steaming/frothing, it
may cause serious burns
and injuries.
SmartSteam
pull &
hold >2s
pull &
hold >2s
tip up
tip down
Barista
Turbo
Important: For an optimal performance, run a cycle with water in the jug at the beginning of the
working day.
Recipe 2 Flush
Recipe 1 Flush