EasyManua.ls Logo

Crem EX Series - Electrical and Handling Safety Warnings

Crem EX Series
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Original instructions.
GENERAL INFORMATION
· Warning and Precautions
The appliance is not suitable for installation in an area where a
water jet could be used. This appliance must not be cleaned
with a water jet or a pressure washer.
The appliance is not suitable for outdoor use, where it would be
exposed to severe weather or extreme temperatures.
Use the inlet hose included with the machine to connect it to the
water mains in accordance with the national rules applicable in the
country where machine is installed. Never reuse damaged hoses.
The use of accessory attachments not recommended by the
appliance manufacturer may result in re, electric shock or injury
to persons.
Plug the machine into a properly installed, earth grounded
electrical outlet with line voltage that matches the specications
for the machine.
Always attach plug to appliance rst, then plug cord into the wall
outlet. To disconnect, turn any control to ″o″, then remove plug
from wall outlet.
For appliances not tted with a supply cord and a plug, means for
disconnection must be incorporated in the xed wiring in accordance
with the wiring rules.
Ensure that the power supply voltage does not uctuate by more than 6%.
Do not let power cord hang over edge of table or counter, or touch
hot surfaces. To reduce the risk of injury, do not drape cord over the
counter top or table top, where it can be pulled on or tripped over
unintentionally by children or users.
Do not remove or disable any of the mechanical, electrical, or thermal
protection safety equipment.
If supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.
In case of emergency, (e.g., the machine catches re or becomes
unusually hot or noisy), disconnect the power immediately and turn
o the water supply.
If the machine is not going to be used for an extended period of time,
disconnect the power. When disconnecting the power, pull the plug
rather than the cable.
Keep all hazardous packaging materials, such as plastic bags,
styrofoam, and staples, out of reach of children.
Before performing maintenance and/or moving the machine, disconnect
the machine from the power supply and wait for it to cool down.

Related product manuals