Crem EX3 1B - Pif - Enabling;Disabling Electronic Preinfusion; Tea - Enabling;Disabling Automatic Hot Water Function; Eco - Enabling;Disabling Eco Mode Function; Tec - Eco Mode Boiler Temperature

11
· tEA – Enabling/Disabling automatic hot water function
To enable or disable the automatic hot water functions, follow the steps below:
1. Enter the service programming and browse through the menu (see previous instructions).
2. When [tEA] is shown on the display, enter by pressing K5.
3. Select with K1 and K2 the hot water tap function: [oFF] Manual hot water tap; [on] Automatic
hot water tap; [St] Smart Tea function (specic model only).
4. Accept and save setting by pressing K5. You are back in the service programming menu.
SERVICE PROGRAMMING
· Eco – Enabling/Disabling Eco mode function
To enable or disable the Eco mode function, follow the steps below:
1. Enter the service programming and browse through the menu (see previous instructions).
2. When [Eco] is shown on the display, enter by pressing K5.
3. Use K1 and K2 to enable [on] or disable [oFF] the Eco mode function in the user menu.
4. Accept and save setting by pressing K5. You are back in the service programming menu.
· tEc – Eco mode boiler temperature
To change the Eco mode machine’s boiler temperature, follow the steps below:
1. Enter the service programming and browse through the menu (see previous instructions).
2. When [tEc] is shown on the display, enter by pressing K5.
3. Select with K1 and K2 the Eco mode boiler temperature.
4. Accept and save setting by pressing K5. You are back in the service programming menu.
· PiF – Enabling/Disabling electronic Preinfusion
To enable or disable the electronic preinfusion function, follow the steps below:
1. Enter the service programming and browse through the menu (see previous instructions).
2. When [PiF] is shown on the display, enter by pressing K5.
3. Use K1 and K2 to enable [on] or disable [oFF] the electronic preinfusion function.
4. Accept and save setting by pressing K5. You are back in the service programming menu.
i
Note:
If enabled on service menu, electronic Preinfusion can be enabled [on] or disabled
[oFF] individually on each group [Pi1], [Pi2] or [Pi3] on the user menu.