Cressi DONATELLO - System Menu and Data Management; System Settings and Units; Dive History and Info; Ascent Alarm Exclusion

22
English
SYSTEM - system menu
SystemmodecandownloaddatatoyourMacorPC,changesystemsettings,
resetthedevice,etc.FromtheSYSTEMscreen,pressLONG
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to access
the menu
UNITS - METRIC/IMPERIAL UNITS OF MEASURE
TheDONATELLO/MICHELANGELO/RAFFAELLOcomputercanmakecalculations
inmetric(metersand°C),orImperialunits(feetand°F).
Tochangetheunitsofmeasure,fromtheUNITSscreen,giveaLong
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press
to enter the function. Then press Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to change the unit of measure and
confirm by pressing Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
.Checktheunitsofmeasure,andthenpress
Longer
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
toexitthefunction.
HISTORY (HIST) - DIVE HISTORY
TheHISTscreenshowsthedivehistory,whichcannotbereset.
Therstlineshowsthetotalnumberofhoursuseddiving,Hxxx.Thesecondline
showthemaximumdepthreached.
INFO
TheINFOscreenprovidessysteminformation:
Therstlineshowstheserialnumber,xxxxx.
Thesecondlineshows the FirmwareVersion, 1xx,andthenumberof battery
changes by the user.
Thewatchcomesfromthefactorywiththebatterychangecountersetat00.
AL.SP - EXCLUDING THE ASCENT ALARM IN AIR/NITROX/GAGE MODE
This function lets the diver disable the audible alarm indicating a rapid ascent
(over12m/min).
WARNING:Anexcessivelyrapidascentincreasestheriskofdecompression
sickness! This function is reserved for instructors who assume full
responsibility for disabling the ascent speed alarm (AL.SP). In any case,
whenthisfunctionisactivated,fortheentiredivethecomputerdisplaysthe
iconofaspeakerwithanX .
HISTORY
HOURS
IN-USE
COUNTER
MAX
DEPTH
HISTORY
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
CHANGE UNITS
SCROLL TO
CHANGE UNITS
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
RETURN
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
ENTER
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
SCROLL TO
INCREASE THE DEPTH
INFO
FIRMWARE
VERSION
NUMBER
OF BATTERY
CHANGES
SERIAL
NUMBER
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
HIGH SPEED ASCENT ALARM TISSUE ERASE
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
ENTER
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
ENTER
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
RETURN
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
RETURN
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
SCROLL TO CHANGE
ON/OFF
ALARM SPEED
SCROLL TO CHANGE
NO / YES,
AND PUSH FOR 5 SEC.
TO ERASE THE TISSUE