Cressi RAFFAELLO - Page 18

18
English
MICHELANGELO:ontheGAS1%O2screen,andLong
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press the button
to enter the function.
TheGAS1O2percentagewillstartashing.
BrieyShort
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
pressthebuttontoincreasetheoxygenpercentage.
Onceyoureachthepercentageyouwant,Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press to confirm.
Thecomputerwillbeeptoconrm.
Next,ShortpresstomovetotheGAS1PPO2screen.Ifyouwanttochangethe
partial pressure, Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press to enter this function.
ThenbrieyShort
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
pressthebuttontosetthedesiredGAS1PPO2partial
pressure and conrm with a Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
 press.The computer will beep to
confirm.
Then press Longer
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to return to the main menu, or press Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
toenableGAS2.
ENABLEGAS2
TheMICHELANGELOcomputerissetwithGAS2settoOFF.
To enable the gas and change its percentage, press Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
.
Then give a Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press until reaching the desired percentage (the
availablevaluesrangefrom21%to99%inincrementsof1%).
Onceyoureachthepercentageyouwant,Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press to confirm.
Thecomputerwillbeeptoconrm.
Then, press Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
tosetthe desiredpartialpressure GAS2PPO2and
confirm by pressing Longer.
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
Then press Longer
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to return to the main menu,
RAFFAELLO:ontheGAS1%O2screen,Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press the button to enter
the function.
TheGAS1O2percentagewillstartashing.
BrieyShort
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
pressthe buttontoincreasethe oxygenpercentage.Once
youreachthepercentageyouwant,Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press to confirm.
Thecomputerwillbeeptoconrm.
Next, press Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to move to the GAS1 PPO2 screen. If you want to
change the partial pressure, Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press to enter this function.
ThenbrieyShort
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
pressthebuttontosetthedesiredGAS1PPO2partial
pressure and conrm with a Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
 press. The computer will beep to
confirm.
Then press Longer
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to return to the main menu, or press Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to
enableGAS2.
ENABLEGAS2
TheRAFFAELLOcomputerissetwithGAS2settoOFF.
To enable the gas and change its percentage, press Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
.
Then give a Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press until reaching the desired percentage (the available
valuesrangefrom21%to99%inincrementsof1%).
Onceyoureachthepercentageyouwant,pressLong
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to confirm.
Thecomputerwillbeeptoconrm.Then,pressShort
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to set the desired
partialpressureGAS2PPO2andconrmbypressingLong.
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
Then press Longer
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to return to the main menu, or Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press to
enableGAS3.
ENABLINGGAS3
TheRAFFAELLOcomputerissetwithGAS3settoOFF.
To enable the gas and change its percentage, press Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
.
Then give a Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press until reaching the desired percentage (the available
valuesrangefrom21%to99%inincrementsof1%).
Onceyoureachthepercentageyouwant,Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press to confirm.
Thecomputerwillbeeptoconrm.Then,Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press to set the desired
partialpressureGAS3PPO2andconrmbypressingLong
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
Then press Longer
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to return to the main menu.