23
English
Tousethisalarmexclusionfunction,fromtheAL.SPscreen,press
Long
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to enter the function. Then press Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to change the setting
betweenON/OFFandthenpressLong
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to confirm your choice.
T.ERASE (TISSUE ERASE) RESET THE DEVICE
Byresettingtheinstrument,allthecalculationsrelatedtothecurrentdesaturation
arereset.Thelogbook,proleandhistoryremainstoredinthememoryevenafter
the instrument is reset.
ThisfunctioncanbeespeciallyusefulwhenthedeviceisrentedinDiveCenters.
DANGER: Never reset your computer if it will be used underwater in
subsequentdives!
Toproceedwiththedevicereset,fromtheT.ERASEscreen,pressLong
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to enter the function.At this point the ashing word NO will appear, and the
word SURE? Briey press Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
to switch from NO toYES and then
immediatelyholddownthebuttonfor5seconds:
Acountdownfrom5to0secondswillbegin,attheendofwhichyouwillhear
three beeps confirming that the device has been reset.
DIVE (PREDIVE)
TheDIVE(predive)screenistheonethatprecedesthedive.
From this screen you can check all the parameters that were set
in advance by the diver.
Before diving, it is veryimportantto set the computer to dive, and check the
accuracy of all the parameters that will accompany the diver throughout
the dive.
AIR
FREE
GAGE
NO DECO
TIME
PPO
2
MAX
DEPTH
MODEPPO
2
MAX
NITROX
GAS
INDICATOR
PPO
2
MAX
DEPTH GAS 1
%O2 GAS 1PPO
2
MAX
GAS 1
DIVE TIME
(MIN.)
MAX DEPTH
DIVE TIME
(SEC.)
DEPTH
DIVE TIME
(MIN.)
MAX DEPTH
DEPTH
DIVE TIME
(SEC.)
THE SCREEN SCROLLS AUTOMATICALLY
PPO
2
MAX
%O2
PPO
2
MAX DEPTH
%O2
PPO
2
MAX
PPO
2
MAX
DEPTH
(MICHELANGELO/RAFFAELLO ONLY)
(RAFFAELLO ONLY)