27
English
MULTI-GAS DIVE GAS SWITCHING (MICHELANGELO and
RAFFAELLO ONLY). BEFORE A GAS SWITCHING DIVE:
The MICHELANGELO/RAFFAELLO also keeps the Air dive program active
by default, until the diver changes it or sets it for use with two mixes in the
EAN (NITROX) mode. Setting the dive mode. In this case, the display will
showtheNITROXicon,anditwillremainonthroughoutthediveanduntilthe
MICHELANGELO/RAFFAELLO settings are changed again. In order for the
computer to adapt its calculation algorithm to the new parameters, the exact
oxygenpercentagevalues(%O2)containedinthecylindersthatwillbeusedmust
beenteredintothecomputer(aftercarefullyanalyzingtheircontent).
GAS SWITCHING DURING THE DIVE.
(MICHELANGELO/RAFFAELLO ONLY)
Whenascendingfromadive,ifthecomputerissettoMODE-SNITROXmode,
theiconfortheGAS1primarymixwill ashassoonasthediverreachesthe
maximumoperatingdepthforthesecondgas,GAS2,toalertthediverthatfrom
thatlevelandupwardthegascanbechanged.Atthispoint,inordertochangethe
mix,Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press the button to move to the second page. Then Longer
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
press the button. The word GAS1 will appear on the last line. Short
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
pressthebuttonandthewordGAS2willappearwiththeparametersof
thesecondmix(MICHELANGELO),orthesecondandthirdmix(RAFFAELLO).
Longer
Short \ NEXT (ONE STEP)
Long (3 Sec.) \ RETURN
Long (1 Sec.) \ ENTER \ ESC
pressthebuttontoconrmthedesiredmix.
NOTE:Theicon for the primarymix, GAS1,will not ashifthe maximum
operating depth for the second mix, GAS2 (MICHELANGELO) or GAS3
(RAFFAELLO)isnotexceededduringthedescent.
DANGER:Ifthecurrentdepthisgreaterthanthemaximumoperatingdepth
permittedbyGAS2,theMICHELANGELOwillnotallowa changeof gas.If
thecurrentdepthisgreaterthanthemaximumoperatingdepthpermittedby
GAS2orGAS3,theRAFFAELLOwillnotallowachangeofgas.