Do you have a question about the Crest Audio FA901 and is the answer not in the manual?
| Signal-to-Noise Ratio | > 100 dB |
|---|---|
| Input Impedance (Unbalanced) | 10k Ohms |
| Type | Power Amplifier |
| Frequency Response | 20Hz - 20kHz |
| Frequency Response Tolerance | +0, -0.5 dB |
| Protection | Short circuit, thermal, DC voltage |
| Dimensions | 483 mm x 89 mm x 387 mm |
| Connectors | XLR and 1/4" TRS inputs, binding post outputs |
Details on cooling system, front panel controls, and status indicators for amplifier operation.
Information on amplifier protection circuitry and physical construction details.
Physical dimensions, gross and net weight, and warranty period for the amplifier.
Detailed power output, frequency response, THD, and noise level specifications.
Requirements for protection circuits, clip limiters, and output stage design.
Specifications for input sensitivity, impedance, and gain.












Loading...