Crest Audio LT Series - Connections; Stereo Parallel; Input; Output

p. 18
LT / ST owner’s manual
connections
5
inputs
LT / ST amplifiers are configured standard with pin 2 hot on XLR inputs.
outputs
Speakers are connected using the high-current five-way binding posts
or speakon connectors, or both.
see—operation modes
Very high current is
available at the outputs.
Please connect your
output cable to the + and
- terminals of each sec-
tion precisely as shown.
a
stereo/parallel
female
XLR
bridged mono
TRS pinouts 3-pin Phoenix (view of connector on rear of amp)
Com In + In -
Speaker + to PIN 1+
Speaker - to PIN 1-
Speaker + to PIN 1+
Speaker - to PIN 2+