Crestron AM-100 AirMedia - Page 12

AirMedia Presentation Gateway Crestron AM-100
Device Administration Menu Showing the Device Setup Screen
Code
A code can be used to limit access to the AM-100. The code feature can
be disabled, randomly generated, or fixed to a specific value.
To specify how the access code is used, select one of the following
options from the Code section:
• Disabled allows any user with the AM-100’s IP address or
hostname to open a client connection without entering an access
code.
• Random sets the AM-100 to randomly generate an access code. A
new code is generated when the last connected presenter
disconnects from the AM-100. The access code is displayed on the
top right of the AM-100 welcome screen as shown on page 3.
• Use the following code sets the AM-100 to display a user-
specified, four-digit access code. The access code is displayed on
the top right of the AM-100 welcome screen as shown on page 3.
8 • AirMedia Presentation Gateway: AM-100 Operations Guide – DOC. 7463D