Crestron AM-100 AirMedia - Setup and Installation; Installation

Crestron AM-100 AirMedia Presentation Gateway
AirMedia™ Presentation
Gateway: AM-100
Setup
Supplied Hardware
A wall-mount bracket is included to mount the AM-100 to a surface. The
hardware supplied with the AM-100 is listed in the following table.
Supplied Hardware for the AM-100
DESCRIPTION QUANTITY
Bracket 1
Screw
2
Washer
2
Installation
Ventilation
The AM-100 should be used in a well-ventilated area.
To prevent overheating, do not operate this product in an area that
exceeds the environmental temperature range for this product. Consider
using forced air ventilation to reduce overheating. Consideration must be
given if installed in a closed or multi-unit rack assembly since the
operating ambient temperature of the environment may be greater than
the room ambient temperature. Contact with thermal insulating materials
should be avoided on all sides of the unit.
Operations Guide – DOC. 7463D AirMedia Presentation Gateway: AM-100 • 1