Crestron CEN-GW1 - Configure the Gateway; Factory Reset

Configure the Gateway
Configure the gateway using the web user interface. For details, refer to
the Configuration section in the CEN-GW1 product manual.
Reboot
To reboot the gateway, press and hold RESET for 8 seconds.
Factory Reset
To factory reset the gateway, press and hold SETUP until the SETUP
LED flashes 6times.The gateway will reboot.
New admin credentials will need to be created after the factory reset
process.
Visit the Product Page
Scan the QR code to visit the product page.
CEN-GW1
www.crestron.com/model/6511027
CENI-GW1
www.crestron.com/model/6511029
7
CEN-GW1 and CENI-GW1
QuickStart
Universal Wireless Gateway - ER, SG, and infiNETEX® Wireless Networks