Crestron CEN-HPRFGW High Powered RF Gateway
CEN-HPRFGW Specifications (Continued)
SPECIFICATION DETAILS
Ethernet 10BASE-T/100BASE-TX,
auto-switching, auto-negotiating,
auto-discovery, full/half duplex,
TCP/IP, UDP/IP, CIP, DHCP,
IEEE 802.3U compliant
Power Requirements
12 VDC 0.5 Amps @ 12 Volts DC
Power Supply CEN-HPRFGW:
120 Volts AC @ 60 Hz
(power supply included)
CENI-HPRFGW:
230 Volts AC @ 50 Hz
(power supply included)
Cresnet Power Usage 2 Watts (85mA @ 24 Volts DC)
with no power supply connected
to the 12VDC connector
Default Net ID 2F
Minimum 2-Series Control
System Update File
1, 2
Version 3.155.1240 or later
Enclosure Metal, black matte powder coat
finish, freestanding or surface
mount (adhesive feet, 3M™ Dual
Lock™ reclosable fastener and
mounting plate included)
Environmental
Temperature 41º to 104ºF (5º to 40ºC)
Humidity 10% to 90% RH
(non-condensing)
Heat Dissipation 5 BTU/Hr
(Continued on following page)
Operations & Installation Guide – DOC. 6587B High Powered Gateway: CEN-HPRFGW • 3
To Next Page
Loading...
