Crestron CGEIB-IP User Manual

Crestron CGEIB-IP KNX Control Interface
Operations & Installation Guide – DOC. 0009 KNX/EIB Control Interface: Crestron CGEIB-IP

1
 DIN-rail mountable
 Control up to 500 group addresses on a KNX/EIB network
 Equipped with an RS232 port and a TCP/IP port
 Capable of receiving live updates. No polling necessary
KNX Control Interface: Crestron
CGEIB-IP
Introduction
The Crestron CGEIB-IP is a control interface by which a Crestron control system
can be coupled to a KNX installation using either RS232 or Ethernet (TCP/IP). Also,
the Crestron CGEIB-IP filters the desired information out of received KNX
messages and sends them to the Crestron control system via the same interface
(RS232 or TCP/IP), which provides the Crestron installation with live updates of the
KNX installation.
Features and Functions
Specifications
Specifications for the Crestron CGEIB-IP are listed in the following table.
Crestron CGEIB-IP Specifications
SPECIFICATION
DETAILS
Power
Power Usage
24 V AC/DC
Minimum 3-Series Control
System Update File
1,2
Version 3 or later
Environmental
Temperature
32º to 131º F (0º to 55º C)
Humidity
0% to 93% RH (non-condensing)

Crestron CGEIB-IP Specifications

General

Brand	Crestron
Model	CGEIB-IP
Category	Control Unit
Language	English