KNX Control Interface Crestron CGEIB-IP
2
KNX/EIB Control Interface: Crestron CGEIB-IP Operations & Installation Guide – DOC. 0009
2M wide DIN rail mounting(35mm)
1. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following
these footnotes.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
This section provides information on the connections, controls and indicators
available on your Crestron CGEIB-IP.
Crestron CGEIB-IP Physical View