Crestron CHV-RSS - Slab Sensor Mounting in Tile or Wood Floors; Tile Floor Mounting; Wood Floor Mounting

Crestron CHV-RSS Remote Slab Sensor
Slab Sensor Mounting in Tile or Wood Floors
In tile floors, ensure that a channel is made in the thin-set mortar, just
above the subflooring, to properly position the sensor.
Tile Floor Mounting
Floor Joists
Subfloor
Heating Cables or Pipes
Thin-set Mortar
Tiles (finished surface)
Slab Sensor
In wood floors, ensure that a channel is cut in the subflooring to
accommodate the slab sensor.
Wood Floor Mounting
Floor Joists
Subfloor
Heating Cables or Pipes
Wood Floor
Slab Sensor
Installation Guide - DOC. 6229A Remote Slab Sensor: CHV-RSS • 5