DigitalMedia 8G+ Receiver 100 Crestron DM-RMC-100-C
14 DigitalMedia 8G+ Receiver 100: DM-RMC-100-C Operations & Installation Guide – DOC. 7000C
Installation
The DM-RMC-100-C mounts on a flat surface such as a wall or ceiling.
The DM-RMC-100-C can also be mounted on a rack rail.
Ventilation
The DM-RMC-100-C should be used in a well-ventilated area. The venting holes
should not be obstructed under any circumstances.
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications.
Mounting on a Flat Surface
To mount the DM-RMC-100-C on a flat surface such as a wall or ceiling, use four
mounting screws (not included). The following illustration shows mounting of the
DM-RMC-100-C on a wall.
NOTE: To ensure optimum ventilation when mounted on a wall, position the
DM-RMC-100-C vertically so that the venting holes are positioned at the top and
bottom of the unit.
Mounting DM-RMC-100-C on a Wall
Mounting Screws (4)
(Not Included)
To Next Page
Loading...
