Crestron DM-RMC-100-C User Manual

DigitalMedia 8G+ Receiver 100 Crestron DM-RMC-100-C
18  DigitalMedia 8G+ Receiver 100: DM-RMC-100-C Operations & Installation Guide – DOC. 7000C
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron Web site. To post a question or to view questions submitted
to Crestron’s True Blue Support, log in at www.crestron.com/onlinehelp
. First-time
users must establish a user account to fully benefit from all available features.
Software Requirements for the PC
NOTE: The latest software can be downloaded from the Crestron Web site
(www.crestron.com/software).
Crestron provides an assortment of Windows

-based software tools to develop a
customized system. Use Crestron SIMPL Windows to create a program to control the
DM-RMC-100-C.
Programming with SIMPL Windows
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”:
Configuration and Program.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
1. To incorporate the DM-RMC-100-C into the system, drag the
DM-RMC-100-C from the DigitalMedia | DM Receivers folder of the
Device Library and drop it into either of the following in System Views:
 A compatible output card of a DM switcher
 Directly to a card in the Ethernet slot of the control system (used
without a DM switcher)
Locating the DM-RMC-100-C in the Device Library

Crestron DM-RMC-100-C Specifications

General

Brand	Crestron
Model	DM-RMC-100-C
Category	Receiver
Language	English