Need help?Do you have a question about the Crestron DM-RMC-100-C and is the answer not in the manual?
FCC rules for digital devices, potential interference, and corrective measures.
Industry Canada compliance statement for digital devices.
Details key features and operational capabilities of the DM-RMC-100-C unit.
Explains the DigitalMedia 8G+ technology for video, audio, and Ethernet transport.
Describes HDBaseT compatibility and its convergence of signals over CAT5e/CAT6.
Details the HDMI output for video, audio, and control signals.
Discusses the Ethernet port for local network device connection.
Explains RS-232, IR, and Ethernet control ports and CEC for display device control.
Describes mounting options and design for discreet installation behind displays.
Lists input signal types, output formats, and supported progressive resolutions.
Specifies input signal type, output signal type, and supported audio formats.
Details DigitalMedia and Ethernet communication specifications.
Outlines power options, temperature, humidity, and heat dissipation.
Provides physical dimensions, weight, and lists available accessories.
Shows a front view of the DM-RMC-100-C with labeled connectors and controls.
Illustrates side views of the DM-RMC-100-C showing connector layout.
Diagrams showing front, bottom, and side dimensions with measurements.
Details HDMI output, COM RS-232, and IR/serial ports.
Describes RJ-45 Ethernet and DM IN ports with their respective LEDs.
Explains RESET, SETUP buttons, and the power status LED.
Guidance on wiring the DM network, using Crestron certified wire and power supplies.
Explains how to assign and manage IP IDs for the DM-RMC-100-C in SIMPL Windows.
Recommendations for proper ventilation to prevent overheating.
Instructions for mounting on flat surfaces and rack rails.
Guidance on making necessary connections and applying power.
Details connections on the left side: HDMI OUT, COM, IR, and LAN.
Details connections on the right side: Ground, DM IN, and 24 VDC.
Specifies PC software requirements and where to download them.
Guide to using SIMPL Windows for programming the DM-RMC-100-C.
Illustrates system tree configurations and device setting adjustments in SIMPL.
Explains the Program Manager view in SIMPL Windows for assigning signals to symbols.
Details methods for establishing communication with the DM-RMC-100-C using Crestron Toolbox.
Describes TCP/IP and USB communication setups via DM switcher or device LAN port.
Provides a table of common problems, causes, and corrective actions.
Lists relevant Crestron documentation for further information.
Contact information and resources for additional support and questions.
Information regarding potential future updates and supplements to the manual.
Procedures for returning merchandise for credit, exchange, or repair service.
Details the terms, conditions, and coverage of the Crestron limited warranty.
To Next Page
General
