Crestron DM-RMC-200-C User Manual

DigitalMedia 8G+™ Receiver 200 Crestron DM-RMC-200-C
Features and Functions
(Continued)
• Provides automatic 3D-to-2D signal conversion
1
• Automatically passes 3D video without scaling to 3D capable displays
1
• Includes content-adaptive noise reduction
• 100% HDCP compliant
• Scalable zoom feature enables 2x2, 3x2, 3x3, 4x3, or 4x4 video
wall capability
2
• Provides analog line and speaker level audio outputs
• DM 8G+ input supports up to 330 foot (100 meter) cable length
3
• Affords a true one-wire connection to a DM
®
switcher or transmitter
• Enables device control via CEC, RS-232, IR, or Ethernet
• Provides two relay control ports and two contact sensing inputs
• Provides 10BASE-T/100BASE-TX Ethernet and USB HID (Human
Interface Device) mouse/keyboard ports
• Low-profile design mounts to a 2-gang US, UK, or European
electrical box
• Includes mounting bracket with integral power pack holder
• Allows quick, easy setup and diagnostics via Crestron Toolbox™
software
DigitalMedia 8G+
DigitalMedia 8G+ provides a true one-wire transport for moving high-definition
video, audio, and Ethernet over low-cost twisted pair cable without compression or
repeaters. One eight-conductor twisted pair cable (sold separately) is required,
supporting distances up to 330 feet (100 meters) using Crestron DM 8G cable or
CAT5e.
3
Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-200-C,
supporting HDMI with HDCP, Deep Color and 3D
1
, handling 1080p60 HDTV with
multi-channel HD lossless audio as well as WUXGA computer resolutions—all
through a single connection. The HDMI output can also handle DVI signals using an
appropriate adapter or interface cable.
4
Stereo audio outputs are also provided for directly driving a pair of speakers, or for
connection to line inputs on the display or a separate amplifier or AV receiver.
In addition, RS-232, IR, relay, closure sensing, and Ethernet control ports are
provided for controlling the display device and for interfacing with other equipment.
1. Automatically passes 3D video if display device supports it (reverts to pass-through mode
without scaling). Provides automatic 3D-to-2D conversion if display device does not support 3D.
2. Video wall processing requires a separate DM-RMC-200-C for each individual display.
3. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G
DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D
cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to
safeguard against unpredictable environmental electrical noise which may impact performance at
resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide
(Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc.
4789) for complete system design guidelines. All cable sold separately.
4. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal.
CBL-HD-DVI interface cable sold separately.
2 • DigitalMedia 8G+™ Receiver 200: DM-RMC-200-C Operations & Installation Guide – DOC. 7126B

Crestron DM-RMC-200-C Specifications

General

Type	AV receiver
Material	Metal
Product color	Black
Maximum resolution	2048 x 1152 pixels
Maximum refresh rate	60 Hz
Ethernet LAN	Yes
RJ-45 input ports	1
Connectivity technology	Wired
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	47 mm
Width	276 mm
Height	202 mm
Weight	1480 g