Crestron DM-RMC-200-C User Manual

Crestron DM-RMC-200-C DigitalMedia 8G+™ Receiver 200
DigitalMedia 8G+™ Receiver
& Room Controller 200:
DM-RMC-200-C
Introduction
The DM-RMC-200-C provides an advanced one-box interface solution for a single
display device as part of a complete Crestron
®
DigitalMedia™ system. It functions
as a DM 8G+™ receiver, video scaler, audio amplifier, and expanded control
interface, providing a single HDMI
®
output along with speaker and line level audio,
Ethernet, and a variety of control ports. Built-in scaling allows the connected display
to handle virtually any video signal regardless of resolution and format. Its compact,
low-profile design allows the DM-RMC-200-C to be installed discreetly behind a flat
panel display or above a ceiling mounted projector. It connects to the head end or
source location using a single CAT5e or Crestron DM 8G™ cable.
1
Features and Functions
• Enhanced DigitalMedia 8G+™ receiver and display controller
• Includes built-in 30 Watt stereo amplifier
• Provides one HDMI or DVI display output
2
• Includes built-in high-definition video scaler
• Accepts any video source from standard NTSC 480i or PAL 576i to
HD 1080p60 with Deep Color
• Also accepts any computer source from VGA to UXGA/WUXGA
• Scales the source to match the native resolution of virtually any popular
video display or computer monitor
• Provides intelligent frame rate conversion
• Allows motion-adaptive de-interlacing or interlacing
• Allows adjustable overscan or underscan up to 7.5%
(Continued on following page)
1. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G
DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D
cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to
safeguard against unpredictable environmental electrical noise which may impact performance at
resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide
(Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc.
4789) for complete system design guidelines. The manuals are available from the Crestron Web site at
www.crestron.com/dmresources. All cable sold separately.
2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal.
CBL-HD-DVI interface cable sold separately.
Operations & Installation Guide – DOC. 7126B DigitalMedia 8G+™ Receiver 200: DM-RMC-200-C • 1

Crestron DM-RMC-200-C Specifications

General

Type	AV receiver
Material	Metal
Product color	Black
Maximum resolution	2048 x 1152 pixels
Maximum refresh rate	60 Hz
Ethernet LAN	Yes
RJ-45 input ports	1
Connectivity technology	Wired
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	47 mm
Width	276 mm
Height	202 mm
Weight	1480 g