Crestron DM-RMC-200-C DigitalMedia 8G+™ Receiver 200
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron Web site. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at www.crestron.com/support.
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
Web site (www.crestron.com/software).
Crestron provides an assortment of Windows
®
-based software tools to develop a
customized system. Use Crestron SIMPL Windows to create a program to control the
DM-RMC-200-C.
Programming with SIMPL Windows
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”:
Configuration and Program.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
1. To incorporate the DM-RMC-200-C into the system, drag the
DM-RMC-200-C from the DigitalMedia | DM Receivers folder of the
Device Library and drop it into either of the following in System Views:
• A compatible output card of a DM switcher
• Directly to a card in the Ethernet slot of the control system
(used without a DM switcher)
Locating the DM-RMC-200-C in the Device Library
Operations & Installation Guide – DOC. 7126B DigitalMedia 8G+™ Receiver 200: DM-RMC-200-C • 23
To Next Page
Loading...
Need help?
General
Weight and Dimensions
