Crestron DM-RMC-200-C - Locating Devices in Device Library

DigitalMedia 8G+™ Receiver 200 Crestron DM-RMC-200-C
The system tree of the control system displays the DM-RMC-200-C in the
appropriate slot with a default IP ID as shown in the following illustrations.
In the first example, the DM-RMC-200-C is used with the DMCO-50
output card in a DM-MD8X8 switcher. In the second example, the
DM-RMC-200-C is used with the C2ENET-2 card in an Ethernet slot on
the control system.
C2ENET-2 Device, Slot 8 (Using Output Card in a DM Switcher)
24 • DigitalMedia 8G+™ Receiver 200: DM-RMC-200-C Operations & Installation Guide – DOC. 7126B