The Crestron® AV3 and PRO3 are rack-mountable 3-Series control
processors offering immense power, expanded memory, numerous
integrated control ports, and optional control card expansion slots.
In the Box
1 AV3 or PRO3, 3-Series Control System
Additional Items
2 Bracket, Rack Ear, 2U (2032678)
4 Foot, 0.5 in. x 0.5 in. x 0.23 in., Adhesive (2002389)
4 Connector, 3-Pin (2003575)
1 Connector, 4-Pin (2003576)
2 Connector, 5-Pin (2003577)
4 Connector, 8-Pin (2003580)
1 Connector, 9-Pin (2003581)
1 Cable, Power, 6 ft 7 in. (2 m) (2001134)
Install the Device
The control system can be mounted into a rack or placed on a flat
surface.
Mount into a Rack
The control system occupies 2U of rack space. Use the three screws from
the front part of each side panel, and a #1 or #2 Phillips screwdriver to
attach the two included rack ears to the device, as shown in the following
illustration. Then mount the device into the rack using four mounting
screws (not included).
Rack Mounting Safety Precautions
Elevated Operating Ambient Temperature: If installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the rack
environment may be greater than room ambient temperature. Therefore,
consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature (Tma)
specified by the manufacturer.
Reduced Airflow: Installation of the equipment in a rack should be such
that the amount of airflow required for safe operation of the equipment
is not compromised.
1
AV3 and PRO3
QuickStart
3-Series® Control System
To Next Page
Need help?
General
