Supplemental Guide – DOC. 7927G TSW-560/TSW-760/TSW-1060: Touch Screens• 51
Add Certificate Dialog Box
To add a new certificate:
1. Click Browse.
2. Navigate to the CA file on the host computer.
3. Select the CA file, and then click Open.
4. Click Load to load the CA file to the touch screen. The upload progress is shown
in the dialog box.
5. Once the touch screen has completed the upload, click OK.
Click the x button to close the Add Certificate dialog box at any time during the upload
process. Clicking the
x button before the CA file is uploaded to the touch screen cancels
the upload.
Click the x button to close the Manage Certificates dialog box and to return to the
802.1x Authentication page.
To Next Page
Loading...
