Need help?Do you have a question about the Crestron FlipTop FT-TS600 and is the answer not in the manual?
General| Display Size | 6 inches |
|---|---|
| Touch Technology | Capacitive |
| Power Supply | PoE (Power over Ethernet) |
| Processor | ARM Cortex-A8 |
| Ethernet | 10/100 Mbps |
| Connectivity | Ethernet |
| Mounting Type | Flush mount |
| Memory | 512 MB RAM |
| Environmental | Operating temperature: 0 to 40 °C |
| Resolution | 800 x 480 pixels |
Details compliance with Federal Communications Commission rules.
Details compliance with Industry Canada regulations.
Overview of the FT-TS600's capabilities and design features.
Describes the product's aesthetic and physical design.
Details the configurable connection compartment options.
Covers the touch screen, streaming video, and audio features.
Describes the AUD OUT and COMPUTER ports.
Details the PWR LED and HW-R Button.
Explains the LAN POE port and ground lug.
Guidelines for connecting the device to an Ethernet network.
Information on setting the IP ID for device identification.
Steps to access and use the setup menus.
Configuration options for the device's Ethernet settings.
Procedure for setting static IP address parameters.
How to add and manage IP table entries.
Controls for master volume, media volume, and audio output.
Adjusting screen brightness and hard key wake behavior.
Configuration for screen standby timeout duration.
Accessing system diagnostics, CPU stats, and memory info.
How to test the function of the hard key push buttons.
Testing touch screen functionality and performing calibration.
Performing network tests and checking Ethernet settings.
Options for displaying various test patterns on the screen.
Testing the Rava SIP intercom functionality.
Performing a test of the built-in microphone.
Displays firmware and OS version details.
Procedure for saving settings and returning to the main project.
Instructions for installing cable management plates.
Details on how to mount the unit in a horizontal surface.
Procedure for attaching the mounting plates to the surface.
Overview of communication methods (USB, TCP/IP).
Details on uploading programs, projects, and firmware.
Table of common problems and their corrective actions.
Lists related documents and how to get further assistance.
Procedures for returning products for service or exchange.
Explains the terms and conditions of the product warranty.
To Next Page
